A hypothetical engineering stress-strain curve shown in the figure has three straight lines PQ, QR, RS with coordinates P(0,0), Q(0.2,100), R(0.6,140) and S(0.8,130). 'Q' is the yield point, 'R' is the UTS point and 'S' the fracture point.

The tougness of the material (in MJ/m³) is __________.

A horizontal bar with a constant cross-section is subjected to loading as shown in the figure. The Young’s modules for the sections AB and BC are 3E and E, respectively.
For the deflection at C to be zero, the ratio P/F is ________.

A square plate of dimension L $$ \times $$ L is subjected to a uniform pressure load P = 250 MPa on its edges as shown in the figure. Assume plane stress conditions. The Young’s modulus E = 200 GPa.

The deformed shape is a square of dimension 𝐿 − 2$$\delta .$$ If 𝐿 = 2 m and $$\delta $$ = 0.001 m, the Poisson’s ratio of the plate material is __________ .

A circular metallic rod of length 250 mm is placed between two rigid immovable walls as shown in the figure. The rod is in perfect contact with the wall on the left side and there is a gap of 0.2 mm between the rod and the wall on the right side. If the temperature of the rod is increased by 200^oC, the axial stress developed in the rod is __________ MPa.

Young’s modulus of the material of the rod is 200 GPa and the coefficient of thermal expansion is 10⁻⁵ per ^oC.