A horizontal bar, fixed at one end (x = 0), has a length of 1 m, and cross-sectional area of 100 mm². Its elastic modulus varies along its length as given by E(x) = 100 e^-x GPa, Where x is the length coordinate (in m) along the axis of the bar. An axial tensile load of 10 kN is applied at the free end (x=1). The axial displacement of the free end is _______ mm.

A point mass of $$100$$ kg is dropped onto a massless elastic bar (cross-sectional area = $$100$$ $$mm$$² ,length = $$1$$ m, Young's modulus = $$100$$ GPa) from a height $$H$$ of $$10$$ $$mm$$ as shown (Figure is not to scale). If g = $$10$$ $$m/s$$² , the maximum compression of the elastic bar is _______ $$mm.$$

A hypothetical engineering stress-strain curve shown in the figure has three straight lines PQ, QR, RS with coordinates P(0,0), Q(0.2,100), R(0.6,140) and S(0.8,130). 'Q' is the yield point, 'R' is the UTS point and 'S' the fracture point.

The tougness of the material (in MJ/m³) is __________.

A horizontal bar with a constant cross-section is subjected to loading as shown in the figure. The Young’s modules for the sections AB and BC are 3E and E, respectively.
For the deflection at C to be zero, the ratio P/F is ________.