ExamSIDE
Questions (Powered by ExamGOAL)
Production Engineering
Metrology and Inspection
Marks 1Marks 2
Sheet Metal Forming Processes
Marks 1Marks 2
Welding Process
Marks 1Marks 2Marks 5
Metal Forming
Marks 1Marks 2Marks 5
Metal Cutting
Marks 1Marks 2Marks 5
Advance Machine Tools
Marks 1Marks 2
Machining
Marks 1Marks 2
Casting
Marks 1Marks 2Marks 4Marks 5Marks 6
Previous Next
1
GATE ME 2016 Set 2
MCQ (Single Correct Answer)
+2
-0.6
For the situation shown in the figure below the expression for $$H$$ in terms of $$r, R$$ and $$D$$ is GATE ME 2016 Set 2 Production Engineering - Metrology and Inspection Question 10 English
A
$$H = D + \sqrt {{r^2} + {R^2}} $$
B
$$H = \left( {R + r} \right) + \left( {D + r} \right)$$
C
$$H = \left( {R + r} \right) + \sqrt {{D^2} - {R^2}} $$
D
$$H = \left( {R + r} \right) + \sqrt {2D\left( {R + r} \right) - {D^2}} $$
2
GATE ME 2015 Set 1
MCQ (Single Correct Answer)
+2
-0.6
In the assembly shown below, the part dimensions are:
$$\eqalign{ & {L_1} = {22.0^{ \pm 0.01}}\,\,mm, \cr & {L_2} = {L_3} = {10.0^{ \pm 0.005}}\,\,mm, \cr} $$
Assuming the normal distributions of part dimensions, the dimension $${L_4}$$ in $$mm$$ for assembly condition would be, GATE ME 2015 Set 1 Production Engineering - Metrology and Inspection Question 11 English
A
$${2.0^{ \pm 0.008}}$$
B
$${2.0^{ \pm 0.012}}$$
C
$${2.0^{ \pm 0.016}}$$
D
$${2.0^{ \pm 0.020}}$$
3
GATE ME 2014 Set 1
MCQ (Single Correct Answer)
+2
-0.6
For the given assembly : $$25$$ $$H7/g8,$$ match Group $$A$$ with Group $$B$$ GATE ME 2014 Set 1 Production Engineering - Metrology and Inspection Question 13 English
A
$$P - {\rm I},\,\,Q - {\rm I}{\rm I}{\rm I},\,\,R - {\rm I}V,\,\,S - {\rm I}{\rm I}$$
B
$$P - {\rm I},\,\,Q - {\rm I}V,\,\,R - {\rm I}{\rm I}{\rm I},\,\,S - {\rm I}{\rm I}$$
C
$$P - {\rm I}{\rm I}\,,\,\,Q - {\rm I}{\rm I}{\rm I},\,\,R - {\rm I}V,\,\,S - {\rm I}$$
D
$$P - {\rm I}{\rm I}\,,\,\,Q - {\rm I}V,\,\,R - {\rm I}{\rm I}{\rm I},\,\,S - {\rm I}$$
4
GATE ME 2014 Set 4
MCQ (Single Correct Answer)
+2
-0.6
A $$GO-No$$ $$GO$$ plug gauge is to be designed for measuring a hole of nominal diameter $$25$$ $$mm$$ with a hole tolerance of $$ \pm 0.015\,\,mm.$$ Considering $$10\% $$ of work tolerance to be the gauge tolerance and no wear condition, the dimension (in $$mm$$) of the $$GO$$ plug gauge as per the unilateral tolerance system is
A
$${24.985^{\matrix{ { + 0.003} \cr { - 0.003} \cr } }}$$
B
$${25.015^{\matrix{ { + 0.000} \cr { - 0.006} \cr } }}$$
C
$${24.985^{\matrix{ { + 0.03} \cr { - 0.03} \cr } }}$$
D
$${24.985^{\matrix{ { + 0.003} \cr { - 0.000} \cr } }}$$
Previous Next
Questions Asked from Marks 2
GATE ME 2023 (2) GATE ME 2022 Set 2 (1) GATE ME 2017 Set 2 (1) GATE ME 2017 Set 1 (1) GATE ME 2016 Set 3 (1) GATE ME 2016 Set 2 (1) GATE ME 2015 Set 1 (1) GATE ME 2014 Set 1 (1) GATE ME 2014 Set 4 (1) GATE ME 2014 Set 3 (1) GATE ME 2013 (1) GATE ME 2010 (2) GATE ME 2009 (1) GATE ME 2008 (1) GATE ME 2007 (1) GATE ME 2004 (1) GATE ME 2003 (3) GATE ME 1997 (1) GATE ME 1993 (1) GATE ME 1992 (1) GATE ME 1991 (1)
GATE ME Subjects
Engineering Mechanics
Machine Design
Strength of Materials
Heat Transfer
Production Engineering
Industrial Engineering
Turbo Machinery
Theory of Machines
Engineering Mathematics
Fluid Mechanics
Thermodynamics
General Aptitude