1
GATE ME 1992
Subjective
+5
-0
A Venturimeter (throat diameter $$=10.5$$ $$cm$$) is fitted to a water pipe line (internal diameter $$=21.0$$ $$cm$$) in order to monitor flow rate. To improve accuracy of measurement, pressure difference across the venturimeter is measured with the help of an inclined tube manometer, the angle of inclination being $${30^0}$$ (see figure below). For manometer reading of $$9.5$$ $$cm$$ of mercury, find the flow rate.Discharge coefficient of venture is $$0.984.$$

2
GATE ME 1990
Subjective
+5
-0
A jet of water with a velocity $${V_1}$$ (Figure shown below) and area of cross-section $${A_1}$$ enters a stream of slow moving water in a pipe of area $${A_2}$$ and velocity $${V_2}$$. The two streams enter with the same pressure $${P_1}$$. After thoroughly mixing in the pipe the stream emerges as a single stream with velocity $${V_3}$$ and pressure $${p_2}$$. If there are no losses in the flow, determine $$\left( {{p_2} - {p_1}} \right)$$ for
$${V_1} = 20\,\,m/s,\,\,$$
$${V_2} = 10\,\,m/s,\,\,$$
$${A_1} = 0.01\,\,{m^2},\,$$
$$\,{A_2} = 0.02\,{m^2},$$
density of water $$\rho = 1000kg/{m^3}.$$
$${V_1} = 20\,\,m/s,\,\,$$
$${V_2} = 10\,\,m/s,\,\,$$
$${A_1} = 0.01\,\,{m^2},\,$$
$$\,{A_2} = 0.02\,{m^2},$$
density of water $$\rho = 1000kg/{m^3}.$$
3
GATE ME 1989
Subjective
+5
-0
In a syringe as shown in the figure, a piston of $$1\,\,c{m^2}$$ cross section is pushed at a constant speed of $$10\,\,cm/s$$ to eject water through an outlet of $$1\,\,m{m^2}.$$ Determine the force required to move the piston. Neglecting losses.

4
GATE ME 1987
Subjective
+5
-0
Consider the saline drip bottle shown. If $$\rho $$ is the density of saline, find
(a) Pressure at $$A,$$
(b) The velocity of flow of saline through the tube. (Neglect viscous losses in tube). Atmospheric pressure $${P_{atm}}.$$
(a) Pressure at $$A,$$
(b) The velocity of flow of saline through the tube. (Neglect viscous losses in tube). Atmospheric pressure $${P_{atm}}.$$

Questions Asked from Marks 5
GATE ME Subjects
Engineering Mechanics
Machine Design
Strength of Materials
Heat Transfer
Production Engineering
Industrial Engineering
Turbo Machinery
Theory of Machines
Engineering Mathematics
Fluid Mechanics
Thermodynamics
General Aptitude