Fluid Mechanics
Fluid Properties
Marks 1Marks 2
Boundary Layer
Marks 1Marks 2Marks 5
Turbulent Flow
Marks 1Marks 2Marks 5
Fluid Kinematics
Marks 1Marks 2
1
GATE ME 2014 Set 3
MCQ (Single Correct Answer)
+2
-0.6
A siphon is used to drain water from a large tank as shown in the figure below. Assume that the level of water is maintained constant. Ignore frictional effect due to viscosity and losses at entry and exit. At the exit of the siphon, the velocity of water is GATE ME 2014 Set 3 Fluid Mechanics - Fluid Dynamics Question 36 English
A
$$\sqrt {2g\left( {{Z_Q} - {Z_R}} \right)} $$
B
$$\sqrt {2g\left( {{Z_P} - {Z_R}} \right)} $$b
C
$$\sqrt {2g\left( {{Z_0} - {Z_R}} \right)} $$
D
$$\sqrt {2g{Z_q}} $$
2
GATE ME 2013
MCQ (Single Correct Answer)
+2
-0.6
Water is coming out from a tap and falls vertically downwards. At the tap opening, the stream diameter is $$20$$ $$mm$$ with uniform velocity of $$2$$ $$m/s.$$ Acceleration due to gravity is $$9.81$$ $$m/{s^2}.$$ Assuming steady, inviscid flow, constant atmospheric pressure everywhere and neglecting curvature and surface tension effects, the diameter in mm of the stream $$0.5$$ $$m$$ below the tap is approximately
A
$$10$$
B
$$15$$
C
$$20$$
D
$$25$$
3
GATE ME 2012
MCQ (Single Correct Answer)
+2
-0.6
A large tank with a nozzle attached contains three immiscible, inviscid fluids as shown. Assuming that the changes in $${h_1},\,\,{h_2}$$ and $${h_3}$$ are negligible, the instantaneous discharge velocity is GATE ME 2012 Fluid Mechanics - Fluid Dynamics Question 39 English
A
$$\sqrt {2g{h_3}\left( {1 + {{{\rho _1}} \over {{\rho _3}}}\,{{{h_1}} \over {{h_3}}} + {{{\rho _2}} \over {{\rho _3}}}{{{h_2}} \over {{h_3}}}} \right)} $$
B
$$\sqrt {2g\left( {{h_1} + {h_2} + {h_3}} \right)} $$
C
$$\sqrt {2g\left( {{{{\rho _1}{h_1} + {\rho _2}{h_2} + {\rho _3}{h_3}} \over {{\rho _1} + {\rho _2} + {\rho _3}}}} \right)} $$
D
$$\sqrt {2g\left( {{{{\rho _1}{h_2}{h_3} + {\rho _2}{h_3}{h_1} + {\rho _3}{h_1}{h_2}} \over {{\rho _1}{h_1} + {\rho _2}{h_2} + {\rho _3}{h_3}}}} \right)} $$
4
GATE ME 2011
MCQ (Single Correct Answer)
+2
-0.6
Figure shows the schematic for the measurement of velocity of air (density $$ = 1.2\,\,kg/{m^3}$$ ) through a constant -area duct using a Pilot tube and a water-tube manometer. The differential head of water (density $$ = 1000\,kg/{m^3}$$) in the two columns of the manometer is $$10$$ $$mm.$$ Take acceleration due to gravity as $$9.8$$ $$m/{s^2}.$$ The velocity of air in $$m/s$$ GATE ME 2011 Fluid Mechanics - Fluid Dynamics Question 40 English
A
$$6.4$$
B
$$9.0$$
C
$$12.8$$
D
$$25.6$$
GATE ME Subjects
Engineering Mechanics
Machine Design
Strength of Materials
Heat Transfer
Production Engineering
Industrial Engineering
Turbo Machinery
Theory of Machines
Engineering Mathematics
Fluid Mechanics
Thermodynamics
General Aptitude