Fluid Mechanics and Hydraulic Machines
Fluid Pressure and Measurement
Marks 1
Hydrostatic Forces
Marks 2
Fluid Dynamics
Marks 1
Boundary Layer Theory
Marks 2
Drag and Lift
Marks 1
Dimensional Analysis
Marks 1Marks 2
Flow Through Pipes
Marks 1
Open Channel Flow
Marks 1Marks 2
Hydraulic Machines
Marks 2
Properties of Fluids
Marks 1Marks 2
Fluid Statics
Marks 1Marks 2
1
GATE CE 2024 Set 2
MCQ (Single Correct Answer)
+2
-0.833

A hypothetical multimedia filter, consisting of anthracite particles (specific gravity: 1.50), silica sand (specific gravity: 2.60), and ilmenite sand (specific gravity: 4.20), is to be designed for treating water/wastewater. After backwashing, the particles should settle forming three layers: coarse anthracite particles at the top of the bed, silica sand in the middle, and small ilmenite sand particles at the bottom of the bed.

Assume

(i) Slow discrete settling (Stoke’s law is applicable)

(ii) All particles are spherical

(iii) Diameter of silica sand particles is 0.20 mm

The CORRECT option fulfilling the diameter requirements for this filter media is

A

diameter of anthracite particles is slightly less than 0.35 mm and diameter of ilmenite particles is slightly greater than 0.141 mm.

B

diameter of anthracite particles is slightly greater than 0.35 mm and diameter of ilmenite particles is slightly less than 0.141 mm.

C

diameter of anthracite particles is slightly less than 0.64 mm and diameter of ilmenite particles is slightly less than 0.10 mm.

D

diameter of anthracite particles is slightly greater than 0.64 mm and diameter of ilmenite particles is slightly less than 0.10 mm.

2
GATE CE 2024 Set 2
Numerical
+2
-0

A 500 m long water distribution pipeline P with diameter 1.0 m, is used to convey 0.1 m3/s of flow. A new pipeline Q, with the same length and flow rate, is to replace P. The friction factors for P and Q are 0.04 and 0.01, respectively. The diameter of the pipeline Q (in meters) is ______________ (rounded off to 2 decimal places).

Your input ____
3
GATE CE 2024 Set 1
MCQ (Single Correct Answer)
+2
-0.833

A flow velocity field $\vec{V} : \vec{V}(x, y)$ for a fluid is represented by

$\vec{V} = 3 \hat{i} + (5x) \hat{j}$

In the context of the fluid and the flow, which one of the following statements is CORRECT?

A

The fluid is incompressible and the flow is rotational.

B

The fluid is incompressible and the flow is irrotational.

C

The fluid is compressible and the flow is rotational.

D

The fluid is compressible and the flow is irrotational.

4
GATE CE 2024 Set 1
Numerical
+2
-0

A standard round bottom triangular canal section as shown in the figure has a bed slope of 1 in 200. Consider the Chezy’s coefficient as 150 m1/2/s.

GATE CE 2024 Set 1 Fluid Mechanics and Hydraulic Machines - Properties of Fluids Question 6 English
The normal depth of flow, y (in meters) for carrying a discharge of 20 m3/s is ___________ (rounded off to 2 decimal places).

Your input ____
GATE CE Subjects
Engineering Mechanics
Strength of Materials Or Solid Mechanics
Structural Analysis
Construction Material and Management
Reinforced Cement Concrete
Steel Structures
Geotechnical Engineering
Fluid Mechanics and Hydraulic Machines
Hydrology
Irrigation
Geomatics Engineering Or Surveying
Environmental Engineering
Transportation Engineering
Engineering Mathematics
General Aptitude