Digital Circuits
1
GATE ECE 2007
MCQ (Single Correct Answer)
+2
-0.6
In the digital-to-Analog converter circuit shown in the figure below,
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
The current i is
2
GATE ECE 2007
MCQ (Single Correct Answer)
+2
-0.6
In the digital-to-Analog converter circuit shown in the figure below,
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
$${V_{R\,}}\, = \,10V$$ and $$R\, = \,10k\Omega $$
The voltage V0 is
3
GATE ECE 2006
MCQ (Single Correct Answer)
+2
-0.6
A 4-bit D/A converter is connected to a free-running 3-bit UP counter, as shown in the following figure. Which of the following waveforms will be observed at V0=?
In the figure shown above, the ground has been shown by the symbol $$\nabla $$
A
B
C
D
4
GATE ECE 2003
MCQ (Single Correct Answer)
+2
-0.6
The circuit shown in figure is a 4-bit DAC
The input bits 0 and 1 are represented by 0 and 5 V respectively. The OP- AMP is ideal, but all the resistances and the 5V inputs have a tolerance of ±10%.
The specification (rounded to the nearest multiple of 5%) for the tolerance of the DAC is
The input bits 0 and 1 are represented by 0 and 5 V respectively. The OP- AMP is ideal, but all the resistances and the 5V inputs have a tolerance of ±10%.
The specification (rounded to the nearest multiple of 5%) for the tolerance of the DAC is
GATE ECE Subjects
Signals and Systems
Network Theory
Control Systems
Digital Circuits
General Aptitude
Electronic Devices and VLSI
Analog Circuits
Engineering Mathematics
Microprocessors
Communications
Electromagnetics