Control Systems
Signal Flow Graph and Block Diagram
Marks 1Marks 2Marks 5
Basic of Control Systems
Marks 1Marks 2
Frequency Response Analysis
Marks 1Marks 2Marks 5Marks 8Marks 10
Root Locus Diagram
Marks 1Marks 2
State Space Analysis
Marks 1Marks 2Marks 5Marks 10
1
GATE ECE 2014 Set 1
MCQ (Single Correct Answer)
+2
-0.6
For the following feedback system $$G\left(s\right)=\frac1{\left(s+1\right)\left(s+2\right)}$$.The 2% settling time of the step response is required to be less than 2 seconds. GATE ECE 2014 Set 1 Control Systems - Time Response Analysis Question 12 EnglishWhich one of the following compensators C(s) achieves this?
A
$$3\left(\frac1{s+5}\right)$$
B
$$5\left(\frac{0.03}s+1\right)$$
C
2(s+4)
D
$$4\left(\frac{s+8}{s+3}\right)$$
2
GATE ECE 2013
MCQ (Single Correct Answer)
+2
-0.6
The open-loop transfer function of a dc motor is given as $$\;\frac{\omega\left(s\right)}{V_a\left(s\right)}=\frac{10}{1+10s}$$, when connected in feedback as shown below, the approximate value of Ka that will reduce the time constant of the closed-loop system by one hundred times as compared to that of the open-loop system is GATE ECE 2013 Control Systems - Time Response Analysis Question 13 English
A
1
B
5
C
10
D
100
3
GATE ECE 2009
MCQ (Single Correct Answer)
+2
-0.6
The unit step response of an under-damped second order system has steady state value of -2. Which one of the following transfer function has these properties?
A
$$\frac{-2.24}{s^2\;+\;2.59s\;+\;1.12}$$
B
$$\frac{-3.82}{s^2\;+\;1.91s\;+\;1.91}$$
C
$$\frac{-2.24}{s^2\;-\;2.59s\;+\;1.12}$$
D
$$\frac{-3.82}{s^2\;-\;1.91s\;+\;1.91}$$
4
GATE ECE 2008
MCQ (Single Correct Answer)
+2
-0.6
Group I lists a set of four transfer functions. Group II gives a list of possible step responses y(t). Match the step responses with the corresponding transfer functions

Group I $$$P=\frac{25}{s^2+25}\;\;\;\;\;Q=\frac{36}{s^2+20s+36}$$$ $$$R=\frac{36}{s^2+12s+36}\;\;\;\;\;S=\frac{49}{s^2+7s+49}$$$

Group II GATE ECE 2008 Control Systems - Time Response Analysis Question 14 English 1 GATE ECE 2008 Control Systems - Time Response Analysis Question 14 English 2 GATE ECE 2008 Control Systems - Time Response Analysis Question 14 English 3 GATE ECE 2008 Control Systems - Time Response Analysis Question 14 English 4

A
$$\begin{array}{l}P\;\;\;\;Q\;\;\;\;R\;\;\;\;S\\3\;\;\;\;\;1\;\;\;\;\;4\;\;\;\;\;2\end{array}$$
B
$$\begin{array}{l}P\;\;\;\;Q\;\;\;\;R\;\;\;\;S\\3\;\;\;\;\;2\;\;\;\;\;4\;\;\;\;\;1\end{array}$$
C
$$\begin{array}{l}P\;\;\;\;Q\;\;\;\;R\;\;\;\;S\\2\;\;\;\;\;1\;\;\;\;\;4\;\;\;\;\;3\end{array}$$
D
$$\begin{array}{l}P\;\;\;\;Q\;\;\;\;R\;\;\;\;S\\3\;\;\;\;\;4\;\;\;\;\;1\;\;\;\;\;2\end{array}$$
GATE ECE Subjects
Signals and Systems
Network Theory
Control Systems
Digital Circuits
General Aptitude
Electronic Devices and VLSI
Analog Circuits
Engineering Mathematics
Microprocessors
Communications
Electromagnetics