Strength of Materials Or Solid Mechanics
Centroid and Moment of Inertia
Marks 1Marks 2
Pure Bending
Marks 1Marks 2
Shear Stress In Beams
Marks 1Marks 2
Strain Energy Method
Marks 1Marks 2
Columns and Struts
Marks 1Marks 2
Complex Stress
Marks 1Marks 2
Deflection of Beams
Marks 1Marks 2
Thin Cylinder
Marks 1Marks 2
Simple Stresses
Marks 1Marks 2
Shear Force and Bending Moment
Marks 1Marks 2
Propped Cantilever Beam
Marks 1Marks 2
1
GATE CE 2008
MCQ (Single Correct Answer)
+2
-0.6
Beam $$GHI$$ is supported by these pontoons as shown in the figure below. The horizontal cross sectional area of each pontoon is $$8\,\,{m^2},$$ the flexural rigidity of the beam is $$10000$$ $$kN$$-$${m^2}$$ and the unit weight of water is $$10$$ $$kN$$/$${m^3}$$. GATE CE 2008 Strength of Materials Or Solid Mechanics - Deflection of Beams Question 11 English

When the middle pontoon is removed, the deflection at $$H$$ will be

A
$$0.2$$
B
$$0.4$$ $$m$$
C
$$0.6$$ $$m$$
D
$$0.8$$ $$m$$
2
GATE CE 2008
MCQ (Single Correct Answer)
+2
-0.6
Beam $$GHI$$ is supported by these pontoons as shown in the figure below. The horizontal cross sectional area of each pontoon is $$8\,\,{m^2},$$ the flexural rigidity of the beam is $$10000$$ $$kN$$-$${m^2}$$ and the unit weight of water is $$10$$ $$kN$$/$${m^3}$$. GATE CE 2008 Strength of Materials Or Solid Mechanics - Deflection of Beams Question 10 English

When the middle pontoon is brought back to its position as shown in the figure above, the reaction at $$H$$ will be

A
$$8.6$$ $$kN$$
B
$$15.7$$ $$kN$$
C
$$19.2$$ $$kN$$
D
$$24.2$$ $$kN$$
3
GATE CE 2007
MCQ (Single Correct Answer)
+2
-0.6
A two span continuous beam having equal spans each of length $$L$$ is subjected to a uniformly distributed load $$\omega $$ per unit length. The beam has constant flexural rigidity.

The reaction at the middle support is

A
$$w$$ $$L$$
B
$${{5wL} \over 2}$$
C
$${{5wL} \over 4}$$
D
$${{5wL} \over 8}$$
4
GATE CE 2007
MCQ (Single Correct Answer)
+2
-0.6
A two span continuous beam having equal spans each of length $$L$$ is subjected to a uniformly distributed load $$\omega $$ per unit length. The beam has constant flexural rigidity.

The bending moment at the middle support is

A
$${{w{L^2}} \over 4}$$
B
$${{w{L^2}} \over 8}$$
C
$${{w{L^2}} \over 12}$$
D
$${{w{L^2}} \over 16}$$
GATE CE Subjects
Engineering Mechanics
Strength of Materials Or Solid Mechanics
Structural Analysis
Construction Material and Management
Reinforced Cement Concrete
Steel Structures
Geotechnical Engineering
Fluid Mechanics and Hydraulic Machines
Hydrology
Irrigation
Geomatics Engineering Or Surveying
Environmental Engineering
Transportation Engineering
Engineering Mathematics
General Aptitude