A single-phase, 22 kVA, 2200 V/220 V, 50 Hz, distribution transformer is to be connected as an autotransformer to get an output voltage of 2420 V. Its maximum kVA rating as an auto-transformer is

Two single-phase transformers T₁ and T₂ each rated at 500 kVA are operated in parallel. Percentage impedances of T₁ and T₂ are (1 + j6) and (0.8 + j4.8), respectively. To share a load of 1000 kVA at 0.8 lagging power factor, the contribution of T₂ (in kVA) is ________.

A 200/400 V, 50 Hz, two-winding transformer is rated at 20 kVA. Its windings are connected as an auto-transformer of rating 200/600 V. A resistive load of 12 Ω is connected to the high voltage (600 V) side of the auto-transformer. The value of equivalent load resistance (in Ohm) as seen from low voltage side is _____.

A balanced (positive sequence) three-phase AC voltage source is connected to a balanced, star connected load through a star-delta transformer as shown in the figure. The line-to-line voltage rating is 230 V on the star side, and 115 V on the delta side. If the magnetizing current is neglected and $${\overline{\mathrm I}}_\mathrm s=100\angle0^\circ$$, then what is the value of $${\overline{\mathrm I}}_\mathrm p$$ in Ampere?