Strength of Materials Or Solid Mechanics
Centroid and Moment of Inertia
Marks 1Marks 2
Pure Bending
Marks 1Marks 2
Shear Stress In Beams
Marks 1Marks 2
Strain Energy Method
Marks 1Marks 2
Columns and Struts
Marks 1Marks 2
Complex Stress
Marks 1Marks 2
Deflection of Beams
Marks 1Marks 2
Thin Cylinder
Marks 1Marks 2
Simple Stresses
Marks 1Marks 2
Shear Force and Bending Moment
Marks 1Marks 2
Propped Cantilever Beam
Marks 1Marks 2
1
GATE CE 1993
MCQ (Single Correct Answer)
+2
-0.6
A simply supported beam of span length $$L$$ and flexural stiffness $$EI$$ has another spring support at the center span of stiffness $$K$$ as shown in fig. The central deflection of the beam due to a central concentrated load of $$P$$ would be GATE CE 1993 Strength of Materials Or Solid Mechanics - Deflection of Beams Question 19 English
A
$$\left( {P{L^3}/48EI} \right) + \left( {P/K} \right)$$ v
B
$$P/\left( {\left( {48EI/{L^3}} \right) - K} \right)$$
C
$$\left( {P{L^3}/48EI} \right) - \left( {P/K} \right)$$
D
$$P/\left( {\left( {48EI/{L^3}} \right) + K} \right)$$
2
GATE CE 1992
MCQ (Single Correct Answer)
+2
-0.6
A cantilever beam of span, $$'L'$$ is subjected to a downward load of $$800$$ $$kN$$ uniformly distributed over its length and a concentrated upward load $$P$$ at its free end. For vertical displacement to be zero at the free end, the value of $$P$$ is:
A
$$300$$ $$kN$$
B
$$500$$ $$kN$$
C
$$800$$ $$kN$$
D
$$1,000$$ $$kN$$
3
GATE CE 1990
MCQ (Single Correct Answer)
+2
-0.6
Two elastic rods $$AB$$ and $$BC$$ are hinged at $$B$$. The joint $$A$$ is a hinged one, joint $$C$$ is over a roller and the joint $$B$$ is supported on a spring having its stiffness as $$K.$$ GATE CE 1990 Strength of Materials Or Solid Mechanics - Deflection of Beams Question 20 English

A load $$P$$ acts at mid-point of the rod $$BC$$. The downward deflection of joint $$B$$ is:

A
$$P/K$$
B
$$2P/K$$
C
$$P/2K$$
D
$$0$$
GATE CE Subjects
Engineering Mechanics
Strength of Materials Or Solid Mechanics
Structural Analysis
Construction Material and Management
Reinforced Cement Concrete
Steel Structures
Geotechnical Engineering
Fluid Mechanics and Hydraulic Machines
Hydrology
Irrigation
Geomatics Engineering Or Surveying
Environmental Engineering
Transportation Engineering
Engineering Mathematics
General Aptitude