A moving coil of a meter has $$100$$ turns, and a length and depth of $$10$$ $$mm$$ and $$20$$ $$mm$$ respectively. It is positioned in a uniform radial flux density of $$200$$ $$mT.$$ The coil carries a current of $$50$$ $$mA.$$ The torque on the coil is

The inductance of a certain moving-iron ammeter is expressed as $$L = 10 + 3\theta - {{{\theta ^2}} \over 4}\mu H,\,\,$$ where $$\,\,\theta \,\,\,$$ is the deflection in radians from the zero position. The control spring torque in $$\,\,25\,\, \times \,\,{10^{ - 6}}\,\,\,$$ Nm/radian. The deflection of the pointer in radian when the meter carries a current of $$5A,$$ is

An ac voltmeter uses the circuit shown below, where the $$PMMC$$ meter has an internal resistance of $$100$$$$\Omega $$ and requires a dc current of $$1$$ $$mA$$ for full scale deflection. Assuming the diodes to be ideal, the value of $${R_s}$$ to obtain full scale deflection with $$100$$ $$V$$ (ac rms) applied to the input terminal would be

A $$100$$ $$\mu A$$ ammeter has an internal resistance of $$100\,\Omega $$. For extending its range to measure $$500$$ $$\mu A$$, the shunt required is of resistance (in $$\Omega $$)