A full-bridge converter supplying an RLE load is shown in figure. The firing angle of the bridge converter is 120º. The supply voltage $$${v_m}\left( t \right) = 200\pi \sin \left( {100\pi t} \right)\,V,$$$ $$$R = 20 Ω, E = 800 V$$$The inductor L is large enough to make the output current I_L a smooth dc current. Switches are lossless. The real power fed back to the source, in kW, is __________.

In the given rectifier, the delay angle of the thyristor $${T_1}$$ measured from the positive going zero crossing of $${V_s}$$ is $${30^ \circ }$$. If the input voltage $${V_s}$$ is $$100$$ $$sin$$ $$\left( {100\,\pi t} \right)$$ $$V,$$ the average voltage across $$R$$ (in Volt) under steady-state is ________.

A fully controlled converter bridge feeds a highly inductive load with ripple free load current. The input supply $$\left( {{V_s}} \right)$$ to the bridge is a sinusoidal source. Triggering angle of the bridge converter is $$\,\alpha = {30^0}.$$ The input power factor of the bridge is ____________.

A diode circuit feeds an ideal inductor as shown in the figure. Given $${V_s} = 100\,\,\sin \,\left( {\omega t} \right)V,$$ where $$\omega = 100\pi $$ rad/s, and $$L=31.83$$ $$mH$$. The initial value of inductor current is zero. Switch $$S$$ is closed at $$t=2.5$$ $$ms.$$ The peak value of inductor current $${i_L}\left( {in\,\,A} \right)$$ in the first cycle is __________.