Consider the following statements.
$$(P)$$ Computer aided process planning $$(CAPP)$$ takes input from material requirement plan $$(MRP).$$
$$(Q)$$ Production flow analysis helps in work cell formation.
$$(R)$$ Group technology takes input from choice of machining or cutting parameters.

Among the above statements, the correct one(s) is (are)

In Computer Aided Process Planning, determination of process sequence for manufacture of any part design without predefined standard plans is known as

In an open loop, point-to-point controlled $$CN$$ drilling machine, a stepper motor, producing $$200$$ angular steps per revolution drives the table of a drilling machine by one angular step per each pulse generated by a pulse generator (shown in figure). Each angular step moves the table by one Basic Length Unit $$(BLU)$$ along $$X$$ axis with a lead screw having a pitch of $$4mm.$$ If the frequency of pulse generator is doubled, the $$BLU$$ will

A $$CNC$$ vertical milling machine has to cut a straight slot of $$10$$ $$mm$$ width and $$2$$ $$mm$$ depth by a cutter of $$10$$ $$mm$$ diameter between points $$(0, 0)$$ and $$(100, 100)$$ on the $$XY$$ plane (dimensions in $$mm$$). The feed rate used for milling is $$50$$ $$mm/min.$$ Milling time for the slot (in seconds) is

The interpolator in a $$CNC$$ machine controls

$$NC$$ contouring is an example of

$$FMS$$ is well suited to mass scale manufacturing.

In $$DNC$$ each machine tool is controlled by a dedicated computer.

$$FAPT$$ is a part programming language.

Control of group of $$NC$$ machines by a supervisory computer is known as ............... control.

Feed motion can be provided with stepper motors in $$CNC$$

The most common interpolation methods in continuous path $$NC$$ machining are

Use of a robot for spray painting is primarily justified for improved.... ....... .... A ...... and reduced......... B....................

A. productivity / consistency
B. cost / hazard

If the $$z$$-axis & $$x$$-axis of $$CNC$$ lathe are provided with straight line controls, it is possible to carry out

The preparatory and miscellaneous codes used in $$CNC$$ part programming and the functions are given in the Table

The correct combination of code and the respective function is

In a numerical control $$(NC)$$ machine positioning system, the measures of precision are expressed by considering a single axis as shown in the Figure.

If $$\sigma $$ is standard deviation of the error distribution, the $$L$$, $$M$$ and $$N$$ are

A single axis $$CNC$$ table is driven by a $$DC$$ servo motor that is directly coupled to a lead screw of $$5$$ $$mm$$ pitch. The circular encoder attached to the lead screw generates $$1000$$ voltage pulses per revolution of the lead screw. The table moves at a constant speed of $$6$$ $$m/min.$$ The corresponding frequency (in $$kHz$$) of the voltage pulses generated by the circular encoder is __________________.

Match the linear transformation matrices listed in the first column to their interpretations in the second column.

In a Flexible manufacturing system, the Automated Guided Vehicles $$(AGV)$$ move at a speed of $$50$$ $$m/min,$$ cover an average distance of $$150$$ $$m$$ to deliver and $$100$$ $$m$$ for return. If the time required for pick-up and drop is $$30$$ $$s$$ each, neglecting idle times, then the number of $$AGV$$$$s$$ required to meet the demand of $$50$$ delivers per hour is ____________.

Each axis of $$NC$$ machine is driven by a stepper motor drive with a lead screw. The pitch of lead screw is $$p$$ $$mm.$$ The step angle of stepper motor per pulse input is $$\alpha $$ degrees/pulse. The ratio of gear drive in stepper motor drive is $$g$$(number of turns of the motor for each single turn of the lead screw). The number of pulses required to achieve a linear movement of $$x$$ $$mm$$ is

A $$CNC$$ instruction $$G91\,\,\,G01\,\,\,X30\,\,\,Y40\,\,\,F100$$ commands the movement of tool along the path at a feed rate of $$100mm/min$$ $$(G91$$-incremental format and $$G01$$-linear interpolation). The feed rate of the tool (in $$mm/min)$$ along the $$X$$ axis will be _______________

In a $$CAD$$ package, mirror image of a $$2D$$ points $$P(5, 10)$$ is to be obtained about a line which passes through the origin and makes an angle of $${45^ \circ }$$ counterclockwise with the $$X$$-axis. The coordinates of the transformed points will be

For a $$3$$-axes $$CNC$$ table, the slide along the vertical axis of the table driven by a $$DC$$ servo motor via lead screw nut mechanism. The lead screw has a pitch of $$5mm.$$ This lead screw is fitted with a relative (incremental) circular encoder. The basic length unit $$(BLU)$$ of the slide along the vertical axis of the table is $$0.005mm.$$ When the table moves along the vertical axis by $$9mm.$$ The corresponding number of pulses generated by the encounter is

The total angular movement (in degrees) of a lead screw with a pitch of $$5.0mm$$ to drive the work table by a distance of $$200mm$$ in a $$NC$$ machine is

A titanium sheet of $$5.0mm$$ thickness is cut by wire cut $$EDM$$ process using a wire of $$1.0mm$$ diameter. A uniform spark gap of $$0.5mm$$ on both sides of the wire is maintained during cutting operation. If the feed rate of the wire into the sheet is $$20mm/min,$$ the material removal rate (in $$m{m^3}/\min $$) will be

In a $$CNC$$ feed drive, a stepper motor with step angle of $$1.8deg$$ drives a lead screw with pitch of $$2mm.$$ The basic length unit $$(BLU)$$ for this drive is

Suppose point $$P1$$ in $$APT$$ (Automatically programmed Tool) programming is coded by statement
$$P1 = POINT/XSMALL,\,\,\,INTOF,\,\,\,LN1,\,\,CR1$$

The coded geometric situation without causing error is

A stepper motor has $$150$$ steps. The output shaft of the motor is directly coupled to a lead screw of pitch $$4mm,$$ which drives a table. If the frequency of pulse supply to the motor is $$200Hz$$, the speed of the table (in $$mm/min)$$ is

The geometric transformation specified by

$$\left[ {x'\,\,y'\,\,1} \right] = \left[ {x\,\,y\,\,1} \right]\left[ {\matrix{ {0.5} & 0 & 0 \cr 0 & {0.25} & 0 \cr 1 & 2 & 1 \cr } } \right]$$ in a $$2D.$$
In a $$2D$$ $$CAD$$ system represents................

In a $$CAD$$ package, a point $$P(6, 3, 1)$$ is projected along a vector $$v(-2, 1, -1).$$ The projection of this point on $$X-Y$$ plane will be

Complete the manual part program for drilling a hole located at point $$(20, 20)$$ from the target point . The depth of the hole to be drilled is $$15mm$$
$$\eqalign{ & \,\,\,\,\,\,FROM/TARG \cr & \,\,\,\,\,\,GOTO/20,\,\,20,\,\,0 \cr} $$

Match the following

Consider the following characteristics:

$$1.$$ Single machine tool.
$$2.$$ Manual materials handling system
$$3.$$ Computer control.
$$4.$$ Random sequencing of part to machines.

Which of the above characteristics are associated with flexible manufacturing system?

Given that the notations of robot joints are $$L$$-linear, $$O$$-orthogonal, $$R$$-rotational, $$T$$-twisting, and $$V$$-revolving, the anatomy of a polar configuration robot is described by the alphabetical string

For machining the circular arc shown in the figure below on a $$NC$$ machine, the interpolation parameters $$(I.K)$$ and the incremental movements in the direction of the $$X$$ and $$Z$$ axes are programmed as

When $$3-2-1$$ principle is used to support and locate a three dimensional work-piece during machining, the number of degrees of freedom that are restricted is

Match the following

Match the following

Match the following

A $$DC$$ servomotor is directly driving an $$NC$$ table. The pitch of the lead screw of the table is $$5$$ $$mm.$$ The motor rotates at $$100$$ $$rpm$$ for an applied voltage of $$10V.$$ If the voltage speed characteristic of the motor is linear, the applied voltage for a table of $$3m/min$$ is equal to:

The component development and manufacturing activities when assisted by a computer are: Computer Aided Graphics $$(CAG), CAD, CAM, CAPP$$ and Computer Aided Quality Control $$(CAQC).$$ The most appropriate sequence of these activities is

$$A\,\,2{1 \over 2}\,\,$$ control in a typical $$CNC$$ machine provides